Lithium polymer batteries automatic liquid injection line
1, equipment introduction,
1.1, the machine table used for flexible packaging power battery liquid injection, quiet place, such as sealing process of production.
1.2, the machine should be installed in the common room for production operation, equipment cabin glove box, liquid injection process, etc. All done automatically in the glove box.
, the main function of the machine table 1.3:
1.3.1) manual scanning, feeding
1.3.2) automatic weighing before injection liquid
1.3.3) product data computer management
1.3.4) After injection liquid battery vacuum let stand
1.3.5) Automatic vacuum pumping gas sealing
1.3.6) After liquid injection automatic weighing
1.3.7) Automatic blanking, artificial battery out from the glove box.
2 Main parameters :
||4PPM（standing for 3 minutes）
|Precision injection fluid
||According to customer's technical requirements。
||The qualification rate of liquid injection once＞99%,Unqualified batteries injected liquid by worker
|Volume of injecting liquid
|Precision electronic scale
|| Measurement range：4Kg，Precision±0.1g。
||3 sets of vacuum standing system
3, the environmental requirements
3.1 ambient temperature: decided by party a's workshop environment;
3.2 relative humidity: dry air is provided by party a;
Power supply: 3.3 three-phase 380 v, 50 hz, voltage fluctuation range: + 10% ~ 10%;
Compressed air: 3.4 after drying, filtering and voltage stability: gas pressure is greater than 5.0 kg/cm2.
3.5 vacuum source: vacuum pump or pipe vacuum, vacuum degree greater than -98 kpa;